Mini-Split Repair & Service in Greater Houston
Your ductless mini-split system stopped cooling—or stopped heating. You need fast diagnosis and honest repair options. LMH Services responds with EPA-608 certified technicians who diagnose exactly what’s wrong, explain your repair choices, and get your system back online. From refrigerant leaks to electrical failures, we handle mini-split repairs with the same precision that installed your system.
Get a Free Estimate
Request service, book online, get a free estimate, ask about financing, or schedule routine maintenance.
Schedule Your Service For urgent issues, calling 832-800-4564 is the fastest way to reach us.
Why Greater Houston Homeowners Trust Us to Repair Mini-Splits
Precise Diagnostic Skills That Identify Root Causes
A mini-split that won’t cool is a symptom; we find the cause. Unlike technicians who recommend blanket component replacement, we use diagnostic tools—refrigerant gauges, electrical multimeters, superheat/subcooling measurement, leak detectors—to pinpoint exactly what failed. Is the indoor fan motor burned out, or is the compressor not sending refrigerant? Does the system have low charge from a leak, or is the expansion valve stuck? Our diagnosis drives every repair decision, saving you money on unnecessary parts and avoiding repairs that address symptoms instead of causes.
Expert Refrigerant Handling and EPA Compliance
Mini-split repairs often involve refrigerant work. We’re EPA 608 certified (Type I, II, III universal certification) and follow strict environmental and legal protocols. We recover refrigerant properly, evacuate air and moisture from the system to precise vacuum levels, and recharge to manufacturer specifications using calibrated scales. Improper refrigerant handling (a common contractor failure) results in undercharge, overcharge, moisture contamination, or air in the system—all of which degrade performance or cause equipment damage. We do it right.
Mini-Split Expertise and Warranty Knowledge
We specialize in ductless mini-split systems from Armstrong, Samsung, and other leading brands. Mini-splits have specific failure patterns, known parts wear-out schedules, and factory diagnostic codes we interpret quickly. We know which repairs are straightforward, which require parts ordering, and whether warranty coverage applies. This specialization accelerates diagnosis and prevents costly misdiagnosis.
Honest Repair-vs-Replace Economics
Some shops push replacements on every call. We evaluate honestly. Is your mini-split 12+ years old with a failed compressor and high repair costs? Replacement may make financial sense. Is it 5 years old with a blown capacitor or frozen coil? Repair is the smart choice. We show you the total cost of ownership—repair cost today vs. equipment replacement cost—so you decide based on facts, not sales pressure.
Same-Day and Emergency Service
Mini-split failure during Houston’s summer heat is urgent. We offer same-day appointments and emergency availability because your home’s comfort isn’t optional. We respond to after-hours and weekend calls so you don’t wait for cooling during a heat wave. Learn about our company’s commitment to fast, reliable service.
Proud Members of Our Local Chambers of Commerce
What Houston-Area Homeowners Say
How We Diagnose and Repair Your Mini-Split System
From the first diagnostic test to the final performance verification, every step is documented and done to EPA standards — so your system performs reliably from day one.
When you call, we ask: What’s the symptom (no cooling, error code, noise, frost)? Which room or unit is affected (single unit or whole system)? How long has this been happening? We also ask about your system’s age and whether it’s been serviced recently. For emergencies (elderly household members, young children in dangerous heat), we prioritize same-day dispatch.
Our technician arrives and visually inspects both units. Is the outdoor compressor unit running (we listen for the compressor hum)? Are there visible leaks or damage to refrigerant lines? Is the indoor wall unit clean or clogged with dust? Is the control panel displaying error codes? We photograph any obvious damage for your records.
We connect manifold gauges to the mini-split’s low-side and high-side ports to measure refrigerant pressure. Unlike central AC systems, mini-split pressure specs vary by model and outdoor temperature. We know the correct pressure range for your specific equipment and conditions.
- Low-side pressure too low? Indicates refrigerant leak or internal metering device failure.
- High-side pressure too high? Indicates overcharge, condenser blockage, or electrical fan failure.
- Both pressures normal but cooling weak? Points to other issues—airflow blockage, expansion device failure, or compressor starting problem.
Pressure numbers alone don’t tell the complete story. We calculate superheat (low-side line temperature vs. pressure saturation point) and subcooling (high-side line temperature vs. pressure saturation point). These measurements reveal the exact refrigerant charge level.
- Superheat abnormal? Charge is too low, or the expansion device is stuck.
- Subcooling abnormal? Charge is too high, or condenser airflow is blocked.
This data eliminates guesswork and guides our repair decision.
We test the capacitor (shared power component for compressor and indoor fan), compressor windings, contactor coil, and indoor/outdoor fan motors using multimeters and capacitance testers. Failed capacitors are the most common single repair—they’re quick, cheap fixes that restore full system operation.
If capacitors and major electrical components test good, we check compressor integrity (winding resistance, continuity) to determine whether the compressor has failed internally.
If pressure readings suggest a leak, we use electronic or soap-bubble leak detectors to scan all refrigerant lines, connections, condenser coil, and evaporator coil. Mini-split leaks commonly occur at line connection points (outdoor fitting or indoor coupling), in the condenser coil itself, or at the expansion device.
Accessible leaks (outdoor line fitting) are often soldered repairs. Leaks inside a coil are serious and may drive a replacement decision.
We check the indoor evaporator coil visually and feel for proper cooling (cold spots) and ice. We verify the condenser outdoor coil isn’t blocked with leaves or dirt. We confirm return air is flowing—no blocked filter, no closed vents, no furniture blocking the indoor unit outlet.
Frozen coils, clogged condensers, or blocked returns are straightforward to address. Weak cooling from poor airflow is a repair that prevents future problems.
Once testing is complete, we explain findings clearly: “Your low-side pressure is reading 35 PSI when it should be 55 PSI. We found a small refrigerant leak at the outdoor line connection. Your compressor and other components test fine. The repair is a line connection resolder plus a refrigerant recharge—approximately [cost]. Alternatively, if you prefer a new system for warranty peace of mind, that would be [price]. Either choice gets you back to full cooling.”
We never pressure you to decide immediately. You have time to ask questions.
Once approved, we proceed with the repair. This may include:
- Soldering refrigerant line leaks — Purge lines with nitrogen, solder the connection, braze if necessary, pressure-test, evacuate (pull vacuum to remove air and moisture), and recharge with precision scales.
- Capacitor replacement — Quick swap of the failed capacitor, system startup test, cooling verification.
- Fan motor or contactor replacement — Electrical component replacement with full testing.
- Expansion device replacement — Requires refrigerant evacuation and recharge.
- Compressor replacement — If the compressor has failed internally, we replace it (or recommend full system replacement if cost-effective).
All work follows EPA regulations for refrigerant recovery and handling.
We run the system through a complete cooling cycle (or heating cycle if it’s winter). We verify pressure readings are correct, superheat/subcooling are in spec, coil temperatures are cold, and the thermostat cycles normally. We confirm no unusual sounds, no leaks, and cooling output matches your home’s needs.
We explain what we repaired, why it failed, and what maintenance or usage habits prevent future occurrences. We discuss whether regular mini-split maintenance can catch similar issues early before they cause downtime.
Mini-Split System Not Working
If your ductless system is weak on cooling, won’t heat, making noise, or displaying error codes, don’t wait. Contact us for rapid diagnosis and transparent repair estimates.
Financing Your Mini-Split Repair
A major mini-split repair shouldn’t strain your budget. LMH Services partners with Wisetack for flexible financing, so you can get your system back online and pay over time.
Financing Benefits
LMH Services has partnered with Wisetack to give you more ways to pay. Wisetack lets you check your options in seconds with no impact to your credit score, and offers simple monthly payment plans without the financial stress.
Keep Your System Running Strong with a Maintenance Plan
Protect your mini-split investment. A maintenance plan from LMH Services keeps your system efficient, extends its lifespan, and catches small issues before they become costly failures — for both Deer Park homes and businesses across the greater Houston area.
Our Maintenance Plans Include
24 Hour Service Available
Plan members get priority access to our 24/7 emergency service line
Prompt, Local Service
We are locally operated in Deer Park and respond quickly
Expert Technicians & Installers
Thorough inspections that catch small issues before they become expensive repairs
Residential & Commercial
Plans tailored to homeowners and business owners alike
Mini-Split Repair Service Areas in Greater Houston
LMH Services responds to mini-split repair calls throughout the Houston area with same-day and emergency availability from our home base in Deer Park, TX. Wherever you are in our service area, you get the same expert diagnosis and transparent repair estimates.
Serving Communities Around:
Not Sure If We Service Your Area?
Chances are we can help! We’ve served the southern Houston area for a while, so please call 832-800-4564 or contact us today to see if we come out to your area.
Mini-Split Repair Questions Greater Houston Homeowners Ask
Repair costs depend on what’s failed—capacitor replacement is typically our most affordable option, while refrigerant work and compressor replacement cost more. We provide a detailed estimate after diagnosis so you know the cost before we begin. Financing is available to spread payments over time.
Yes, but we first evaluate the economics. A compressor replacement is a significant investment. If your system is 12+ years old, a new mini-split system with full manufacturer warranty might represent better long-term value. We present the repair-vs-replacement analysis and let you decide based on total cost of ownership.
Most diagnoses take 30–60 minutes of on-site testing. We measure pressures, test electrical components, check for leaks, and explain findings. Once you approve the repair, execution time varies—capacitor replacement takes 1 hour; refrigerant work with leak repair takes 2–3 hours.
No. Error codes mean the control board detected a fault and shut the system down to prevent damage. Running a system with an active fault could cause compressor damage or safety hazards. Call for diagnosis instead of trying to reset the system repeatedly.
Water leaking from the indoor unit indicates a blocked condensation drain. The system removes humidity by condensing it on the cold evaporator coil, then drains that water through a small line. If the drain is clogged (dirt, mold, or ice), water backs up and leaks. We clear the drain and can add a drain-line safety switch to shut the system down if the drain fails again.
For emergencies, yes. If you call in the morning during hot weather and it’s truly urgent (elderly household members, medical conditions), we prioritize same-day dispatch. For standard appointments, we usually get you in within 24–48 hours.
Recharging after a leak repair takes 1–2 hours. We recover old refrigerant, evacuate the system to a deep vacuum (removing air and moisture), and then recharge with the precise amount for your equipment using calibrated scales. Proper evacuation and charging are critical—rushing this step creates problems.
Equipment failures are covered by the manufacturer’s warranty (manufacturers typically cover 5–10 years depending on the component). Our repair work is warranted for 1 year—if a component we repaired fails due to our workmanship, we fix it at no charge. We provide all documentation so you understand what’s covered.
Absolutely. Annual maintenance catches small problems before they become failures. A yearly tune-up includes pressure checks (catch leaks early), coil cleaning (prevent ice buildup and mold), filter replacement, and electrical connector inspection (prevent corrosion damage). Houston’s humidity makes annual service especially valuable.
We warrant our repairs. If the issue persists after we’ve completed the work, we diagnose further at no charge and fix what we missed. We don’t leave you with a broken system.
Get Expert Mini-Split Repair in Greater Houston
We use diagnostic tools—refrigerant gauges, electrical multimeters, superheat/subcooling measurement, leak detectors—to pinpoint exactly what failed. Our diagnosis drives every repair decision, saving you money on unnecessary parts.
We’re EPA 608 certified (Type I, II, III universal certification) and follow strict environmental and legal protocols. We recover refrigerant properly, evacuate air and moisture from the system to precise vacuum levels, and recharge to manufacturer specifications.
We specialize in ductless mini-split systems from the leading brands. We know specific failure patterns, parts wear-out schedules, and factory diagnostic codes. This specialization accelerates diagnosis and prevents costly misdiagnosis.
Mini-split failure during Houston’s summer heat is urgent. We offer same-day appointments and emergency availability because your home’s comfort isn’t optional. We respond to after-hours and weekend calls.
We evaluate honestly. Is your mini-split 12+ years old with a failed compressor? Replacement may make financial sense. Is it 5 years old with a blown capacitor? Repair is the smart choice. We show you the total cost of ownership so you decide based on facts.