Deer Park, TX Furnace Maintenance Services

Typical Gas Furnace Maintenance Calls Include:

The steps required in a complete gas furnace tune-up vary a bit based on the age and configuration of your furnace, the most common maintenance steps include:

For Both Gas and Electric Furnaces:

Inspection: On arrival, we'll dutifully inspect your gas furnace and carefully note its condition.
Cleaning: If you have a replaceable furnace filter we'll change it. If you have an electronic air cleaner or other IAQ system we'll inspect it and clean the airstream components as needed. We'll also clean the furnace blower and control compartment.
Lubrication: We'll lubricate any moving parts that require lubrication like motors, bearings, or fans to reduce friction and prevent noise.
Room Air Blower: We'll inspect and clean the air blower as needed. We'll measure the amperage and voltage for the fan motor to ensure it is in great condition.
Ductwork: Check ductwork for loose joints or hangers, and seal as needed.
Thermostat(s): We'll check your thermostats for proper operation. If they utilize batteries for power, we'll change the batteries.
Complete After Maintenance System Run Test: We'll test run your furnace for several minutes. We'll check for proper temperature rise, blower operation, and burner operation.

If you have an electric furnace, will check the amperage in the heating mode to assure proper heat output.
If you have a gas furnace, we'll check the temperature rise across your heat exchanger.

Clean-up: We'll pick-up our tools, remove any old filters, and thoroughly clean our workspace.
Tune-up Visit Report: We'll explain our work and document any potential problems or recommended repairs.

Schedule Repair

Additional Steps for Gas Furnaces:

Check Ignition System: We'll inspect the pilot light assembly or ignition system and clean as necessary.
Gas Pressure and Burner: Verify proper gas pressure and inspect burners and clean if needed.
Heat Exchanger: Inspect gas furnace heat exchanger for cracks, soot, and corrosion. Clean if needed.
Venting System: Inspect the flues and ventilation system to ensure proper operation. If you have a condensing furnace, we'll check the condensation drains and any condensation pumps.

With our experience, we'll provide the best furnace tune-up solutions for both residential and commercial applications. We'll make sure you're ready for efficient, safe, and reliable winter comfort.

Other Furnace Services

If you're having trouble with your existing furnace we offer 24 /7 repairs and we service all brands. Click here for more information about our heating repair services.

If we find your furnace needs major repairs, of if its is more than 12 years old, we'll likely recommend you consider upgrading to a new Armstrong furnace. Click here for more details.

Deer Park, TX Furnace Maintenance

Stay warm this winter Schedule Now

ONLY

^$125

Furnace Maintenance

Schedule Furnace Maintenance Today with LMH

Typical Gas Furnace Maintenance Calls Include:

Additional Steps for Gas Furnaces:

Other Furnace Services

Join Our Maintenance Agreement

Family Owned LMH Services

Family Owned by Texas natives

Licensed and Insured

ArmstrongAir® ProTeam Dealers

Service Areas: